45,9200

53,8700

Yeni

Populer

Outlet

Kampanya

Hediyeli

Özel Fiyat
Sipariş Kodu
35105
Ean
E35105
Marka

HIKVISION

Ürün Kodu
DS-3WF3000-EI-5AC/P
Stok

5

HIKVISION (DS-3WF3000-EI-5AC/P) 5Ghz 867Mbps 3KM OUTDOOR WIRELESS ACCESS POINT (KİT OLARAK SATILIR)

5Ghz 867Mbps 3KM Wireless Bridge Kit

  • Up to 3 km wireless transmission distance
  • 867 Mbps 802.11ac wireless bridge
  • Built-in 8 dBi 2 x 2 MIMO antenna
  • Visualized topology management
  • Standard PoE Input & Output
  • Plug and Play
  • General
  • Product Dimensions (W × H × D)   :  90.8 mm × 187.87 mm × 57.87 mm (3.58'' × 7.4'' × 2.28'')
  • Package Dimensions (W × H × D)  :  256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38")
  • Net Weight   :  0.26 kg (0.57 lb) per device
  • Gross Weight  :  1.1 kg (2.43 lb)
  • Packing List  :  Wireless Bridge × 2,PoE Power Supply × 2,AC Cord × 2,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1,Binding Tape × 4
  • Packing Method  :  Packing in pairs
  • Working Temperature  :  -30 °C to 65 °C (-22 °F to 149 °F)
  • Working Humidity  :  5% to 95% (no condensation)
  • Storage Temperature  :  -40 °C to 80 °C (-40 °F to 176 °F)
  • Storage Humidity  :  5% to 95% (no condensation)
  • Installation Mode  :  Pole Mounting
  • Ingress Protection  :  IP55
  • Power Consumption  :  2.43 W for typical (1-ch 2MP IPC), Max. 3.6 W
  • Wireless Parameter
  • Max. Transmission Rate of Air Interface  :  ≤ 867 Mbps
  • Wireless Standard  :  IEEE 802.11/a/n/ac
  • Working Frequency Band  :  5150 MHz ~ 5250 MHz,5250 MHz~ 5350 MHz,5470 MHz~ 5725 MHz,5725 MHz~ 5825 MHz
  • Antenna Gain  :  8 dBi
  • Antenna Angle  :  (H) Beamwidth [3 dB] 50° (V) Beamwidth [3 dB] 50°
  • Transmitting Power  :  22 dBm @11ac 80MHz MCS0 (Note: Transmitting power may vary with local regulations.)
  • Receiving Sensitivity  :  -84 ±2dBm@AC80-MCS0
  • Throughput Rate  :  PTP: ,90 Mbps/0.5 KM(AC80),90 Mbps/1 KM(AC80),40 Mbps/3 KM(AC80),PTMP(1 to 4): ,20 Mbps/3 KM(AC80)
  • PoE Power Supply
  • PoE Port  :  AP: LAN1 802.3af/at PoE IN; CPE: LAN1 passive PoE IN, LAN2 802.3 af PoE OUT
  • PoE Power Budget  :  10 W
  • PoE Distance  :  100 m
  • Hardware Parameter
  • Network Interface  :  2 × 10/100 Mbps RJ45 ports
  • LED Indicator  :  Power indicator,LAN indicator,Signal intensity indicator
  • Reset  :  Hardware resetting button
  • Power Supply  :  48V PoE/12~24V DC;Check the physical interface image below for more details.
  • Software Function
  • Application Function  :  IFM,IPM,DFS,TPC
  • Channel Width  :  20/40/80 MHz
  • Channel Selection  :  Auto/manual selection
  • Security Mode  :  WPA2-PSK
  • Security Mechanism  :  Wireless network name hidden
  • Network Protocol  :  NTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging)
  • Management Method  :  HCP,Web,iVMS-4200,HPP
  • System Log  :  Syslog,Control center information
  • Upgrade  :  Web,iVMS-4200,HCP,HPP
  • HPP

    Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

    1. Reboot device

    2. Restore device

    3. Display the topology information

    4. Display the connection status between AP and CPEs, including signal intensity, backgroud noise, sending & receiving rate.

    5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power

    6. Bridge alignment

    7. Spectrum scanning

    8. PoE output management

  • Approval
  • EMC  :  CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
  • Safety  :  CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)
  • Chemistry  :  CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
  • Radio  :  EN 301 893,EN 300 440,EN 62311,EN 301 489-3,EN 301 489-17